TOTAL Polystyrene Impact 830

About
Polystyrene 830: A high melt flow, high impact polystyrene specially designed for hard to fill injection molding applications. The material is targeted for large parts, thin wall parts, or molds with complex runner and gate systems. The high flow 830 material aids production of stress free parts. Application: Thin wall injection molding Textile spools Medical applications Excellent color concentrate carrier resin General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

About

Polystyrene 830: A high melt flow, high impact polystyrene specially designed for hard to fill injection molding applications. The material is targeted for large parts, thin wall parts, or molds with complex runner and gate systems. The high flow 830 material aids production of stress free parts. Application: Thin wall injection molding Textile spools Medical applications Excellent color concentrate carrier resin General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

Product Description
Supplier	TOTAL
Generic	PS (HIPS)
Material Status	Commercial: Active
Features	High impact resistance,High liquidity,HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³
Melt Flow Rate
200℃，5.0kg	13	g/10min	ASTM D1238
Shrinkage rate
MD	0.40 to 0.70	%	ASTM D955
Moisture	< 0.10	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2210	MPa	ASTM D638
tensile strength	22.8	MPa	ASTM D638
Tensile strain
fracture	45	%	ASTM D638
Bending modulus	2070	MPa	ASTM D790
bending strength	39.3	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	110	J/m	ASTM D256
Drop hammer impact	13.6	J	ASTM D3029

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	93.3	℃	ASTM D1525
Hot deformation temperature
annealing	87	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

optical performance	Nominal value	Unit	Test method
gloss
60°	94		ASTM D523

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.