| About |
|---|
| Toughblend® ABS-1401 is a medium flow and good rigidity and good impact compound. The addition of fillers further enhanced its dimensional stability for parts requiring tight dimension tolerance.&& |
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,Good Dimensional Stability,Moderate liquidity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.35 | % | ASTM D995 |
| Melt Flow Rate | |||
| 200℃，10.0kg | 11.00 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 77 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 2.00 | % | ASTM D638 |
| bending strength | |||
| 23℃ | 110 | MPa | ASTM D790 |
| Bending modulus | |||
| 23℃ | 5800 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 100 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.60 mm | HB | UL-94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 71 | J/m | ASTM D256 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 -90 | °C | |
| Drying time | 4.0-6.0 | Hr | |
| Injection temperature | |||
| Rear barrel temperature | 210-220 | °C | |
| Central temperature of the barrel | 220-230 | °C | |
| Barrel front temperature | 230-240 | °C | |
| Die temperature | 240-250 | °C | |
| Mold temperature | 70-80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |