| About |
|---|
| Toyolac® 100G-20 Toyolac® 100G-20 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.&&Toyolac® 100G-20 Toyolac® 100G-20 is an Acrylonitrile Butadiene Styrene (ABS) material filled with 20% glass fiber. It is available in Asia Pacific or Europe. Important attributes of Toyolac® 100G-20 are: Flame Rated RoHS Compliant&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | Europe,Asia Pacific,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 220℃，10kg | 17 | g/10min | ISO 1133 |
| Molding Shrinkage | 0.1-0.3 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 102 | MPa | ISO 527-2 |
| Tensile Strain | |||
| brk | 3 | % | ISO 527 |
| Flexural Modulus | 6540 | MPa | ISO 178 |
| Flexural Strength | 155 | MPa | ISO 178 |
| Rockwell Hardness | 120 | ISO 2039-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notched Impact strength | 8 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| HDT | |||
| 1.8 MPa | 104 | ℃ | ISO 75-1/-2 |
| Vicat Softening Temperature | 95 | ℃ |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 1.5 mm | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 0.12 in/min |
| 4. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |