| About |
|---|
| Toyolac® TM335-GM2 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Applications of Toyolac® TM335-GM2 include appliances, automotive and electrical/electronic applications. Primary characteristic: high flow.&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Features | Sprayable,High liquidity |
| Availabilitys | Asia Pacific,Europe,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 220℃，10kg | 25 | g/10min | ISO 1133 |
| Molding Shrinkage | 0.4-0.7 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 46 | MPa | ISO 527-2 |
| Flexural Modulus | 2310 | MPa | ISO 178 |
| Flexural Strength | 69 | MPa | ISO 178 |
| Tensile Strain | |||
| brk | 38 | % | ISO 527 |
| Rockwell Hardness | 112 | ISO 2039-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notched Impact strength | 26 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| HDT | |||
| 1.8 MPa | 80 | ℃ | ISO 75-1/-2 |
| Coeff.of linear therm expansion | |||
| flow | 8.4 | cm^-5/cm/℃ | ASTM D696 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |