| About |
|---|
| TPSiV™ 3345-65A NAT 25564 is a Thermoplastic Silicone Vulcanizate (TPSiV) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Chemical Resistant Wear Resistant&& |
| Product Description | |
|---|---|
| Generic | TPSiV |
| Material Status | Commercial: Active |
| Features | Good wear resistance,Solvent resistance,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | ISO 1183 |
| Spiral flow length | 28.0 | cm | Internal Method |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 7.30 | MPa | ISO 37 |
| TD, 100% strain | 3.30 | MPa | ISO 37 |
| Tensile strain | |||
| TD, fracture | 560 | % | ISO 37 |
| tear strength | |||
| TD | 41 | kN/m | ISO 34-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 70 | ISO 868 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 80 to 100 | °C | |
| Drying time – hot air dryer | 3.0 to 6.0 | hr | |
| Recommended maximum moisture content | < 0.030 | % | |
| Barrel rear temperature | 170 to 180 | °C | |
| Barrel middle temperature | 185 to 195 | °C | |
| Barrel front temperature | 195 to 205 | °C | |
| Nozzle temperature | 200 to 210 | °C | |
| Processing (melt) temperature | 205 | °C | |
| Mold temperature | 10 to 40 | °C | |
| Back pressure | 0.700 to 1.40 | MPa | |
| Screw speed | 100 to 150 | rpm | |
| Vent depth | 0.013 to 0.025 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Condition B |
| 3. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |