| About |
|---|
| TPSiV™ X5300 A 8506 NAT 25644 is a Thermoplastic Silicone Vulcanizate (TPSiV) product. It can be processed by extrusion or injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: low to no odor/taste.&& |
| Product Description | |
|---|---|
| Generic | TPSiV |
| Material Status | Commercial: Active |
| Features | Low odor,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.998 | g/cm³ | ISO 1183 |
| Spiral flow length | 30.0 | cm | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 83 | ISO 868 | |
| tensile strength | |||
| fracture | 14.0 | MPa | ISO 527-2/5A/50 |
| Tensile strain | |||
| fracture | 28 | % | ISO 527-2/5A/50 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | |||
| TD | 63 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| 100℃，24 hr | 58 | % | ISO 815 |
| 100℃，72 hr | 64 | % | ISO 815 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Condition A |
| 3. Cross direction |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |