| About |
|---|
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 75 | ASTM D2240，ISO 868 | |
| tensile strength | 55 | MPa | ASTM D412，ISO 527 |
| tear strength | 220 | N/mm² | ASTM D624，ISO 34 |
| Tensile strain | 390 | % | ASTM D412，ISO 527 |
| Tensile modulus | |||
| 100% strain | 25 | MPa | ASTM D412，ISO 527 |
| 300% strain | 38 | MPa | ASTM D412，ISO 527 |
| Resilience | 27 | % | ASTM D2630，ISO 4662 |
| Compression deformation | |||
| 24h，70℃ | 41 | % | ISO 815 |
| Wear amount | 67 | mm³ | ISO 4649 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.24 | ASTM D792，ISO 2781，JIS K7311 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -13 | ℃ | ASTM D3418，ISO 815 |
| Vicat Softening Temp | 135 | ℃ | ASTM D1525，ISO R306 |
| Process Conditions | |||
|---|---|---|---|
| Processing temperature | Nominal value | Unit | Test method |
| drying temperature | 100 | ℃ | |
| Melt Temperature | 180-230 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |