| About |
|---|
| Product Description | |
|---|---|
| Supplier | POLYU |
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Low temperature toughness |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | ASTM D792 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 55 | ASTM D2240 | |
| tensile strength | 37.24 | MPa | ASTM D412 |
| Tensile strain | 400 | % | ASTM D412 |
| Tensile modulus | |||
| 100% strain | 12.74 | MPa | ASTM D412 |
| 300% strain | 23.52 | MPa | ASTM D412 |
| tear strength | 14.7 | N/m | ASTM D624 |
| Permanent compression deformation | 45 | % | ASTM D395 |
| Wear amount | ≤100 | mm³ | DIN 53516 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |