TPU-T3180 - SOLIAO

About
硬度：Shore A70-Shore A95,良好的加工性能，成型周期短、优异的力学性能，可广泛用于鞋材、型材、管材、脚轮、手机外壳保护套、共混改性等领域。

Product Description
Supplier	INOV
Generic	TPU
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792
hardness	81	Shore A	ASTM D2240

MECHANICAL	Nominal value	Unit	Test method
tensile strength	27	MPa	ASTM D412
100% 模量	44	MPa	ASTM D412
300% modulus	7	MPa	ASTM D412
Tensile strain
fracture	750	%	ASTM D412
tear strength	89	kN/m	ASTM D624

Process Conditions
Processing conditions	Nominal value	Unit	Test method
Processing temperature	180-200	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.