| About |
|---|
| TPUCO® TPUE-UE80 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific for extrusion. Primary attribute of TPUCO® TPUE-UE80: Wear Resistant. Typical applications include: Hose/Tubing Conveyors Film Sheet Wire & Cable&& |
| Product Description | |
|---|---|
| Supplier | PU |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Good wear resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 80 | ASTM D2240 | |
| tensile strength | |||
| fracture | 23 | MPa | ASTM D412 |
| 100% strain | 5 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D412 |
| Wear amount | 14 | mg | |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding conditions | Nominal value | Unit | Test method |
| Zone 1 temperature | 160 | °C | |
| Zone 3 temperature | 165 | °C | |
| Zone 5 temperature | 170 | °C | |
| Die temperature | 170 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |