TPV Elastoprene® N90A-i00

About
Ni Series – TPV Elastoprene® It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials. It has good resistance to the effects of ozone, UV rays and diverse chemical products, with an operating temperature of up to 135°C. It comes in pellet form, and it is transformed by means of traditional machinery used for plastic. It is a completely recyclable and reusable material. Recommended for injection and co-injection transformation processes. The excellent properties of this material make it ideal for the demanding requirements of the automotive industry. Its main application is for the manufacture of injected and co-injected products that require an elastic functionality in sealing systems. In the construction industry, it can be used for supports, stops, sealing and expansion joints. It is also used in the manufacture of membranes, tool handles and other types of consumer products.&&

About

Ni Series – TPV Elastoprene® It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials. It has good resistance to the effects of ozone, UV rays and diverse chemical products, with an operating temperature of up to 135°C. It comes in pellet form, and it is transformed by means of traditional machinery used for plastic. It is a completely recyclable and reusable material. Recommended for injection and co-injection transformation processes. The excellent properties of this material make it ideal for the demanding requirements of the automotive industry. Its main application is for the manufacture of injected and co-injected products that require an elastic functionality in sealing systems. In the construction industry, it can be used for supports, stops, sealing and expansion joints. It is also used in the manufacture of membranes, tool handles and other types of consumer products.&&

Product Description
Generic	PP+EPDM
Material Status	Commercial: Negative
Features	Weather resistance is good,Renewable resources,Ozone resistance,Solvent resistance,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 5 seconds, 6.00 mm, injection molding	90		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
Yield, 2 mm	11.0	MPa	ISO 37
100% strain, 2 mm	5.50	MPa	ISO 37
Tensile strain
Fracture, 2 mm	420	%	ISO 37
tear strength
23℃，2.00 mm	21	kN/m	ISO 34-1
Compression deformation
70℃，22 hr	48	%	ISO 815

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-50.0	℃	ISO 812

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
2.00 mm	HB		UL 94

Supplementary information	Nominal value	Unit	Test method
Ozone resistance	0 Rating		ISO 1431-1

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Proposed maximum recycled material ratio	20	%
Nozzle temperature	200 to 220	°C
Processing (melt) temperature	180 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 20 in/min
3. Method A, Trouser
4. Type A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.