TPX™ MLL411 - SOLIAO

About
TPX™ MLL411是一种聚甲基戊烯共聚物（PMP 共聚物）产品,。它,在非洲和中东或欧洲有供货。

Product Description
Supplier	Mitsui
Generic	聚甲基戊烯共聚物
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
260℃，5.0kg	22	g/10min

MECHANICAL	Nominal value	Unit
Tensile modulus	410	MPa
Tensile strength (yield)	17.0	MPa
Tensile strain
fracture	30	%
Bending modulus	330	MPa
bending strength	13.0	MPa

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	134	℃
Melting peak temperature	223	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.