| About |
|---|
| Trademark PS GP1300 is a General Purpose Polystyrene product. It can be processed by injection molding and is available in North America. Applications of Trademark PS GP1300 include containers, food contact applications, household applications, kitchenware and medical/healthcare. Characteristics include: Clarity Food Contact Acceptable Good Mold Release Good Processability Good Toughness&& |
| Product Description | |
|---|---|
| Generic | PS (GPPS) |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good stripping performance,Food contact compliance,Low temperature toughness |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 13 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：24 hrs | 0.40 to 0.80 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 3.18 mm | 3100 | MPa | ASTM D638 |
| tensile strength | |||
| 3.18 mm | 46.2 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.18 mm | 3.0 | % | ASTM D638 |
| Bending modulus | |||
| 6.35 mm | 3100 | MPa | ASTM D790 |
| bending strength | |||
| 6.35 mm | 58.6 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 19 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 6.35 mm | 87.8 | ℃ | ASTM D648 |
| Vicat Softening Temp | 98.3 | ℃ | ASTM D1525 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.10 in/min |
| 4. (F0) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |