TRIEL® 5401BM

About
TRIEL® 5401BM is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America. Typical application: Automotive.&&

Product Description
SupplierSamyang
GenericTPEE
Material StatusCommercial: Active
AvailabilitysNorth America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.15g/cm³ASTM D792
Melt Flow Rate
230℃,2.16kg1.0g/10minASTM D1238
Shrinkage rate
MD1.5 to 1.7%ASTM D955
Water absorption rate
23℃,24hr0.50%ASTM D570

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D40 ASTM D2240
tensile strength ASTM D638
fracture22.6MPaASTM D638
5% strain3.92MPaASTM D638
10% strain5.88MPaASTM D638
50% strain10.8MPaASTM D638
Tensile strain
fracture> 400%ASTM D638
Bending modulus63.7MPaASTM D790
bending strength
yield3.92MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch ASTM D256
-40℃No Break ASTM D256
23℃No Break ASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45 MPa, unannealed56.0ASTM D648
Vicat Softening Temp155ASTM D1525 2
Melting temperature200ASTM D2117

Notes
1. Typical properties: these are not to be construed as specifications.
2. Rate B (120°C/h), Loading 1 (10 N)
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.