| About |
|---|
| Trithene® TS 4016是一种低密度聚乙烯+ LLDPE材料,。 该产品在拉丁美洲有供货,加工方式为:薄膜挤出。 Trithene® TS 4016的主要特性有: 加工性能良好 可接触食品 耐热 典型应用领域包括: 电影 食品接触应用&& |
| Product Description | |
|---|---|
| Generic | LDPE+LLDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Food contact compliance,Heat Stabilized |
| Availabilitys | Latin America |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.6 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Self dynamic, blow molded film | 0.10 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| 5% secant, MD: 50 µ m, blow molded film | 100 | MPa | ASTM D882 |
| 5% secant, TD: 50 µ m, blow molded film | 110 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, fracture, 50 µ m, blow molded film | 25.0 | MPa | ASTM D882 |
| TD, fracture, 50 µ m, blow molded film | 22.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m, blow molded film | 460 | % | ASTM D882 |
| TD, fracture, 50 µ m, blow molded film | 780 | % | ASTM D882 |
| Drop hammer impact | |||
| 50 µ m, blow molded film | 160 | g | ASTM D1709-A |
| Elmandorf tear strength | ASTM D1922 | ||
| MD: 50 µ m, blow molded film | 350 | g | ASTM D1922 |
| TD: 50 µ m, blow molded film | 530 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D2457 | ||
| 45 °, 50.0 µ m, blow molded film | 63 | ASTM D2457 | |
| 60 °, 50.0 µ m, blow molded film | 96 | ASTM D2457 | |
| Haze | |||
| 50 µ m, blow molded film | 9.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 160 to 165 | °C | |
| Barrel 2 zone temperature | 170 to 175 | °C | |
| Barrel 3 zone temperature | 170 to 180 | °C | |
| Connector temperature | 175 to 185 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |