| About |
|---|
| Trithene® TX 3003是一种低密度聚乙烯材料,。 该产品在拉丁美洲有供货,。 Trithene® TX 3003的主要特性有: 高分子量 高光泽度 具可灭菌性 可接触食品 良好的尺寸稳定性 典型应用领域包括: 包裹物 电影 食品接触应用&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Good Dimensional Stability,Good disinfection,Food contact compliance,High molecular weight,Weight distribution |
| Availabilitys | Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.27 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| Yield, molding | 12.0 | MPa | ASTM D638 |
| Fracture, molded | 16.0 | MPa | ASTM D638 |
| friction coefficient | |||
| Self dynamic, blow molded film | 0.45 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| 5% secant, MD: 50 µ m, blow molded film | 125 | MPa | ASTM D882 |
| 5% secant, TD: 50 µ m, blow molded film | 130 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, fracture, 50 µ m, blow molded film | 27.0 | MPa | ASTM D882 |
| TD, fracture, 50 µ m, blow molded film | 24.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| Fracture, molded | 620 | % | ASTM D638 |
| MD, fracture, 50 µ m, blow molded film | 330 | % | ASTM D882 |
| TD, fracture, 50 µ m, blow molded film | 680 | % | ASTM D882 |
| Drop hammer impact | |||
| 50 µ m, blow molded film | 200 | g | ASTM D1709-A |
| Elmandorf tear strength | ASTM D1922 | ||
| MD: 50 µ m, blow molded film | 350 | g | ASTM D1922 |
| TD: 50 µ m, blow molded film | 280 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 114 | ℃ | ASTM D1525 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, 50.0 µ m, blow molded film | 96 | ASTM D2457 | |
| Haze | |||
| 50 µ m, blow molded film | 7.5 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 150 to 165 | °C | |
| Barrel 2 zone temperature | 160 to 175 | °C | |
| Barrel 3 zone temperature | 170 to 185 | °C | |
| Connector temperature | 180 to 195 | °C | |
| Melt temperature | 180 to 210 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |