| About |
|---|
| TROSIFOL® Solar R40 is a Polyvinyl Butyral (PVB) material. It is available in Asia Pacific, Europe, or North America.&& |
| Product Description | |
|---|---|
| Supplier | Kuraray |
| Generic | PVB |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.07 | g/cm³ | DIN 53479 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 23.0 | MPa | ISO 527-3 |
| Tensile strain | |||
| fracture | > 250 | % | ISO 527-3 |
| Adhesion to Glass | > 16.0 | MPa |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 2.2E-4 | 1/℃ | ISO 11359-2 |
| specific heat | 1850 | J/kg/℃ | ISO 11357-4 |
| Thermal conductivity coefficient | 0.20 | W/m/K | EN 12664 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 23℃ | 2.0E+12 | ohms·cm | IEC 60093 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.482 | DIN 53491 | |
| Transmittance | 91.0 | % | EN 410 |
| UV transmittance | 375 | nm | EN 410 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Compressive Shear Strength |
| 3. At 0.5% H2O content |
| 4. LSG made of 2 x 3 mm low-iron glass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |