| About |
|---|
| The Tru-Bond™ Plastic Bonding Series of products provide UV/Visible light cured bonds to a wide range of plastics including ABS, polycarbonate, PET, PETG, flexible vinyls, urethanes and acrylics. The adhesive creates a flexible resilient polymer with outstanding impact resistance and flex. These products can also cure through most translucent substrates and UV blocked plastics.&& |
| Product Description | |
|---|---|
| Supplier | Devcon |
| Generic | SMMA |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,UV Cure,Elastic |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Water absorption rate | |||
| 24hr | 4.3 | % | ASTM D570 |
| VOC Content | < 1.0 | % | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Elastic modulus | |||
| MD | 3.42 | MPa | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.500 | ||
| transparency | > 98.0 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Storage period | 100 | wk |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| temperature range | -54 to 149 | ℃ | |
| Volume contraction | 7.4 | % | |
| nonvolatile content | > 99 | % |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | Clear/Transparent | ||
| Density | 0.998 | g/cm³ | |
| flash point | 77.2 | ℃ | |
| viscosity | 0.95 | Pa·s |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear Shrinkage | 2.0 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 42 | ||
| tensile strength | 3.52 | MPa | |
| Tensile strain | |||
| fracture | 350 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |