Tru-Bond™ PSA 3000

About
The Tru-Bond™ PSA series are one-part, solventless adhesives with a new proprietary technology. These products offer two distinct curing advantages. First, this material can be cured through previously assembled clear or translucent substrates in the traditional UV curing mode, or the adhesive can be cured first and then allows for assembly of the parts at some future point. The second alternative provides the ability to use with any substrate, clear, translucent or opaque. This adhesive can bond a wide range of substrates including PE, PP, Delrin, and most plastics, metals, glass, or ceramics and can be sprayed, roll coated, bead or brush applied.&&

About

The Tru-Bond™ PSA series are one-part, solventless adhesives with a new proprietary technology. These products offer two distinct curing advantages. First, this material can be cured through previously assembled clear or translucent substrates in the traditional UV curing mode, or the adhesive can be cured first and then allows for assembly of the parts at some future point. The second alternative provides the ability to use with any substrate, clear, translucent or opaque. This adhesive can bond a wide range of substrates including PE, PP, Delrin, and most plastics, metals, glass, or ceramics and can be sprayed, roll coated, bead or brush applied.&&

Product Description
Supplier	Devcon
Generic	SMMA
Material Status	Commercial: Active
Features	UV Cure,Agglomerability
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Water absorption rate
24hr	0.0	%	ASTM D570
VOC Content	< 1.0	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	20

optical performance	Nominal value	Unit	Test method
Refractive index	1.500
transparency	> 98.0

THERMAL	Nominal value	Unit	Test method
Storage period	100	wk

Supplementary information	Nominal value	Unit	Test method
nonvolatile content	> 99	%

Uncured Properties	Nominal value	Unit
colour	Clear/Transparent
Density	1.07	g/cm³
flash point	> 100	℃
viscosity	3.0	Pa·s

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.