TRYCITE™ 8202

About
TRYCITE™ 8202 is a matte, translucent oriented printing and laminating polystyrene film. Main characteristics: Matte, translucent film with balanced biaxial orientation Rubber modified for increased toughness No additives, 100% Polystyrene film Excellent for printing and metallising to give matte finish Excellent gluing performance Humidity resistant Applications: lamination to polystyrene foam and sheet, label, window box film, photo and stamp albums Temperature stable -30°C to +70°C (-22°F to 158°F) Food Contact approved Extensive range of stocked slit widths available: From 55 up to 2040 mm (2.16 up to 94.5 in) Film thicknesses: 32, 50, 57, 64 and 75 µm (1.26, 2.00, 2.25, 2.52, 2.95 mils) Core diameter: 76 mm (3 in)&&

About

TRYCITE™ 8202 is a matte, translucent oriented printing and laminating polystyrene film. Main characteristics: Matte, translucent film with balanced biaxial orientation Rubber modified for increased toughness No additives, 100% Polystyrene film Excellent for printing and metallising to give matte finish Excellent gluing performance Humidity resistant Applications: lamination to polystyrene foam and sheet, label, window box film, photo and stamp albums Temperature stable -30°C to +70°C (-22°F to 158°F) Food Contact approved Extensive range of stocked slit widths available: From 55 up to 2040 mm (2.16 up to 94.5 in) Film thicknesses: 32, 50, 57, 64 and 75 µm (1.26, 2.00, 2.25, 2.52, 2.95 mils) Core diameter: 76 mm (3 in)&&

Product Description
Supplier	DOW
Generic	PS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
film	Nominal value	Unit	Test method
film thickness	1.26; 2.0; 2.25; 2.52; 2.95 mil (32; 50; 57; 64; 75 µ
tensile strength			ASTM D882
MD, fracture	80.0	MPa	ASTM D882
TD, fracture	65.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	15	%	ASTM D882
TD, fracture	20	%	ASTM D882
Elmandorf tear strength			ASTM D1922
MD：25 µm	7.5	g	ASTM D1922
TD：25 µm	8.5	g	ASTM D1922
dosage			ASTM D4321
32.0 µm	29.8	m²/kg	ASTM D4321
50.0 µm	19.1	m²/kg	ASTM D4321
57.0 µm	16.7	m²/kg	ASTM D4321
64.0 µm	14.9	m²/kg	ASTM D4321
75.0 µm	12.7	m²/kg	ASTM D4321

optical performance	Nominal value	Unit	Test method
gloss
60°	65		ASTM D2457
Haze	18	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.