| About |
|---|
| Styrene/butadiene block copolymer with enhanced styrenic resins compatibility for heightened impact strength. Superior antiblocking property. Flexible container delivery available. It is supplied in pellet form. Styrenic resins modifier, imparting increased impact strength, mainly for food containers.&& |
| Product Description | |
|---|---|
| Supplier | Asahi Kasei |
| Generic | SBS |
| Material Status | Commercial: Active |
| Features | High impact resistance,High anti-blocking,Block Copolymer |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 4.5 | g/10min | ISO 1133 |
| 200℃，5.0kg | 20 | g/10min | ISO 1133 |
| Styrene/Butadiene | 40/60 | Internal Method | |
| viscosity | |||
| 25% toluene solution, 23 ℃, 2.00 mm | 0.44 | Pa·s | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 23 ℃, 2.00 mm, molded | 91 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃, 2 mm | 25.0 | MPa | ISO 37 |
| 300% strain, 23 ℃, 2 mm | 4.50 | MPa | ISO 37 |
| Tensile strain | |||
| Fracture, 23 ℃, 2 mm | 790 | % | ISO 37 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Compression Molded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |