| About |
|---|
| Polyamide 6 mineral-filled is an engineering plastic based on thermoplastic polymer – polyamide 6 – and mineral stuff – talc and mica- that changes its properties. Application Polyamide 6 mineral-filled is applied for production of machine components, high-tech, industrial and consumer products.&& |
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Nontoxicity |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 to 1.31 | g/cm³ | Internal Method |
| Shrinkage rate | |||
| MD | 0.60 to 0.80 | % | Internal Method |
| Particle size distribution -2-5 mm | > 97 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | Internal Method | ||
| TD, fracture | > 100 | MPa | Internal Method |
| — | > 60.0 | MPa | Internal Method |
| Tensile strain | |||
| fracture | > 6.0 | % | Internal Method |
| Bending modulus | > 2800 | MPa | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | > 70 | kJ/m² | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 210 to 230 | ℃ | Internal Method |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+13 | ohms | Internal Method |
| Volume resistivity | > 1.0E+13 | ohms·cm | Internal Method |
| Dielectric strength | > 20 | kV/mm | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |