| About |
|---|
| Tygon F-4040-A is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon F-4040-A include engineering/industrial parts and hose/tubing. Characteristics include: Good Flexibility Low to No Odor/Taste&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low odor |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.49 | % | ASTM D570 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Compression deformation | 40 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 73.9 | ℃ | ASTM D794 |
| Embrittlement temperature | -37.2 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 16 | kV/mm | ASTM D149 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 57 | ASTM D2240 | |
| tensile strength | |||
| yield | 12.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 310 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |