TYNELOY® NAV190

About
TYNELOY® NAV190 is a Polyphenylene Ether + PS (PPE+PS) material. It is available in North America. Primary attribute of TYNELOY® NAV190: Flame Rated.&&

Product Description
Generic	PPO(PPE)+PS
Material Status	Commercial: Active
Features	V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.50 to 0.70	%	ASTM D955
Water absorption rate
24hr	0.070	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
6.4mm	320	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	93.3	℃	ASTM D648
1.8 MPa, unannealed	87.8	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.60 mm	V-0	UL 94
3.20 mm	5V	UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	115		ASTM D785
tensile strength
yield	42.7	MPa	ASTM D638
Tensile strain
fracture	25	%	ASTM D638
Bending modulus	2210	MPa	ASTM D790
bending strength	55.2	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.