TYNEP® E7350

About
TYNEP® E7350 is a Polyethylene Terephthalate (PET) material filled with 35% glassmineral. It is available in North America.&&

Product Description
GenericPET
Material StatusCommercial: Active
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density1.38g/cm³ASTM D792
Shrinkage rate
MD0.20 to 0.60%ASTM D955
Water absorption rate
24hr0.080%ASTM D570

MECHANICALNominal valueUnitTest method
tensile strength
fracture103MPaASTM D638
Tensile strain
yield2.0%ASTM D638
Bending modulus7580MPaASTM D790
bending strength152MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
3.2mm64J/mASTM D256
Notched impact strength of cantilever beam
3.2 mm530J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature ASTM D648
0.45 MPa, unannealed249ASTM D648
1.8 MPa, unannealed216ASTM D648

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+15ohms·cmASTM D257
Dielectric strength
1.57 mm in air21kV/mmASTM D149
Dielectric constant
1 MHz3.90 ASTM D150
Dissipation factor
1 MHz0.020 ASTM D150

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.