| About |
|---|
| TyrFil® is a two-component system consisting of Catalyst blend (side A) and Prepolymer (side B). It is designed to be used for filling tires.&& |
| Product Description | |
|---|---|
| Generic | PUR+MDI |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 6 to 10 | ||
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 2.03 | MPa | |
| Tensile strain | |||
| fracture | 600 | % | |
| tear strength | |||
| — | 9.98 | kN/m | |
| cracking | 1.4 | kN/m | |
| Basho’s elasticity | 43 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Storage period | 52 | wk |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 620 | cP | |
| 25℃ | 700 | cP | |
| Gelation time | 30.0 to 40.0 | min |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt density | |||
| 25℃ | 1.08 | g/cm³ | |
| 25℃ | 1.06 | g/cm³ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 25℃ | 2.0 | day | |
| Mixing ratio | |||
| — | 100:101.6 | ||
| — | 1:1 | ||
| Processing temperature | 21 to 27 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |