| About |
|---|
| TYRIN™ 7000 is a very high viscosity chlorinated polyethylene with low crystallinity. It is used for the impact modification of rigid PVC for profiles, sheet and pipes. It is available as a free-flowable powder and can be handled in bulk. A benefit of the resin is its enhanced impact strength.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | CPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| tensile strength | |||
| 100% strain | 1.60 | MPa | ISO 37 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Fusion heat | < 2.00 | J/g | Internal Method |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Apparent density | 0.39 | g/cm³ | Internal Method |
| Chlorine content | 35.0 | wt% | ISO 1158 |
| oils | |||
| soybean oil | 3.0 | phr | Internal Method |
| Ash Content | < 2.0 | % | ISO 247 |
| Volatiles | < 0.30 | % | ISO 248 |
| Average particle size | 250 | µm | ISO 2591-1 |
| Apparent viscosity of melt | 2900 | Pa·s | ISO 11443 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Formulated |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |