About |
---|
TYRIN™ CM3630 E is a medium viscosity chlorinated polyethylene with low crystallinity. It is used as an elastomer in thermoset formulations for cable jackets and hoses. It is available in powder form. A benefit of the resin is its oil and heat resistance.&& |
Product Description | |
---|---|
Supplier | DOW |
Generic | CPE |
Material Status | Commercial: Active |
Availabilitys | Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.16 | g/cm³ | ISO 1183 |
Apparent density | 0.45 | g/cm³ | Internal Method |
Mooney viscosity | |||
ML 1+4,125℃ | 80 | MU | ASTM D1646 |
Chlorine content | 36.0 | wt% | ISO 1158 |
Ash Content | < 2.0 | % | ISO 247 |
Volatiles | < 0.20 | % | ISO 248 |
Average particle size | 280 | µm | ISO 2591-1 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |