| About |
|---|
| UBE Nylon 1022B (Dry) UBE Nylon 1022B is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion or injection molding and is available in North America. Typical application: Fabrics/Fibers. Characteristics include: Flame Rated Chemical Resistant Good Mold Release Heat Resistant Impact Resistant&&UBE Nylon 1022B Medium viscosity (Injection, Extrusion)&& |
| Product Description | |
|---|---|
| Supplier | UBE |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,noise reduction,Good stripping performance,Self-lubricating,High Heat Resistance,Good wear resistance,Grease resistance,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Recommended maximum moisture content | 0.10 | % | |
| Barrel rear temperature | 220 | °C | |
| Barrel middle temperature | 230 | °C | |
| Barrel front temperature | 245 | °C | |
| Nozzle temperature | 245 | °C | |
| Processing (melt) temperature | 250 | °C | |
| Mold temperature | 70 to 80 | °C | |
| Injection pressure | 63.7 | MPa | |
| Back pressure | 9.80 | MPa | |
| Screw speed | 100 to 150 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |