| About |
|---|
| UBE Polyethylene F222NH is a Polyethylene material. It is available in North America. Important attributes of UBE Polyethylene F222NH are: Clarity Good Processability High Gloss Typical application of UBE Polyethylene F222NH: Packaging&& |
| Product Description | |
|---|---|
| Supplier | UBE |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 2.0 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -75.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 94.0 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 54 | ASTM D2240 | |
| tensile strength | |||
| fracture | 16.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 150 | MPa | ASTM D747 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |