| About |
|---|
| Product Description | |
|---|---|
| Supplier | UENO |
| Generic | 液态聚合物 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| Electrical performance | Nominal value | Unit | Test method |
| Tensile strength | 186 | Mpa | ASTM D638 |
| Dielectric strength | |||
| 1 mm | 45 | kV/mm | ASTM D149 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | |||
| TD | 0.8 | % | |
| MD | 0.0 | % | |
| Density | 1.62 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 13700 | MPa | ASTM D790 |
| bending strength | 216 | Mpa | ASTM D790 |
| Tensile strain | 1.5 | % | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 108 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| TD | 5.5E-5 | /℃ | ASTM D696 |
| MD | 5E-6 | /℃ | ASTM D696 |
| Hot deformation temperature | |||
| 1.8 MPa | 285 | ℃ | ASTM D648 |
| 0.45 MPa | >295 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |