| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyetherimide |
| Material Status | Commercial: Active |
| Features | High liquidity |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Coeff. of linear thermal expansion | |||
| Flowing flow | 19 | um/(m-°C) | ISO 11359-2 |
| Horizontal flow xflow | 25 | um/(m-°C) | ISO 11359-2 |
| Hot deformation temperature HDT | |||
| 1.8 MPa | 250 | ℃ | ISO 75-1/-2 |
| 0.45 MPa | 275 | ℃ | ISO 75-1/-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Flexural Modulus | 14500 | MPa | ISO 178 |
| Tensile Modulus | 15900 | MPa | ISO 527 |
| Tensile Strength | |||
| Broken BRK | 146 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK | 1.65 | % | ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | 6.5 | kJ/m² | ISO 180/1A |
| Izod Unnotched Impact strength of cantilever beam | 17.3 | kJ/m² | ISO 180/1U |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | |||
| Flowing flow | 0.2-0.3 | % | SABIC |
| Horizontal flow xflow | 0.3-0.6 | % | SABIC |
| Melt Flow Rate | |||
| 320℃，5kg | 7.6 | g/10min | ASTM D1238 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |