| About |
|---|
| 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). US FDA and European Food Contact approved. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyetherimide |
| Material Status | Commercial: Active |
| Features | Biocompatible,Food contact compliance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ASTM D792 |
| Density | 1.34 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 200℃，3.80kg | 5.0 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 360℃，5 kg | 9.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.50 to 0.60 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 1.0 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.60 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4680 | MPa | ASTM D638 |
| Tensile modulus | 4500 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 115 | MPa | ASTM D638 |
| fracture | 115 | MPa | ISO 527-2/5 |
| yield | 114 | MPa | ASTM D638 |
| yield | 115 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 4.0 | % | ISO 527-2/5 |
| fracture | 6.0 | % | ASTM D638 |
| yield | 6.0 | % | ASTM D638 |
| yield | 4.0 | % | ISO 527-2/5 |
| Bending modulus | 4500 | MPa | ISO 178 |
| 50 mm span | 5500 | MPa | ASTM D790 |
| bending strength | 185 | MPa | ISO 178 |
| bending strength | |||
| Yield, 50 mm span | 160 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 7.0 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 53 | J/m | ASTM D256 |
| 23℃ | 53 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | ISO 180/1U | ||
| -30℃ | 30 | kJ/m² | ISO 180/1U |
| 23℃ | 30 | kJ/m² | ISO 180/1U |
| Dart impact equipped with measuring instruments | |||
| 23℃，Total Energy | 10.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 205 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 100 mm span | 205 | ℃ | ISO 75-2/Ae |
| Vicat Softening Temp | 223 | ℃ | ASTM D1525 10 |
| Vicat Softening Temp | |||
| B50 | 212 | ℃ | ISO 306 |
| B120 | 217 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| TD：23~150℃ | 6.0E-5 | 1/℃ | ISO 11359-2 |
| TD：-40~40℃ | 6.0E-5 | 1/℃ | ASTM E831 |
| MD：23~150℃ | 2.6E-5 | 1/℃ | ISO 11359-2 |
| MD：-40~40℃ | 3.2E-5 | 1/℃ | ASTM E831 |
| Relative temperature index | |||
| Electrical performance | 170 | ℃ | UL 746 |
| Strength mechanical performance | 170 | ℃ | UL 746 |
| Impact mechanical performance | 170 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| 3.2 mm in oil | 15 | kV/mm | IEC 60243-1 |
| Compared to the leakage tracing index | 150 | V | IEC 60112 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 150 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Hopper temperature | 80 to 120 | °C | |
| Barrel rear temperature | 340 to 395 | °C | |
| Barrel middle temperature | 350 to 405 | °C | |
| Barrel front temperature | 360 to 415 | °C | |
| Nozzle temperature | 350 to 405 | °C | |
| Processing (melt) temperature | 370 to 410 | °C | |
| Mold temperature | 140 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. Type I, 0.20 in/min |
| 4. 0.051 in/min |
| 5. 0.079 in/min |
| 6. at Break |
| 7. 80*10*4 sp=62mm |
| 8. 80*10*4 mm |
| 9. 120*10*4 mm |
| 10. Rate A (50°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |