| About |
|---|
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | polybutylene terephthalate |
| Material Status | Commercial: Active |
| Features | Good heat aging resistance,High Heat Resistance,Flame Characteristics |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.65 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23°C, 24 hr | 0.40 | % | ISO 62 |
| 23°C, 50RH | 0.20 | % | ISO 62 |
| Melt flow index | |||
| 250°C12.16Kg | 11 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23°C | 125 | MPa | ISO 527-2 |
| Tensile modulus | |||
| 23°C | 8200 | MPa | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23°C | 9 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23°C | 48 | kJ/m² | ISO 179/1eU |
| -300°C | 50 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45MPa unannealed | 223 | ℃ | ISO 75-2/Bf |
| 1.80MPa final annealing | 200 | ℃ | ISO 75-2/Af |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.00E+17 | ohm·cm | IEC 60093 |
| Surface resistivity | 1.00E+13 | ohm | IEC 60093 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |