| About |
|---|
| Ultramid 8202C HS BK102 is a heat stabilized, low viscosity, pigmented black, PA6, injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It is also available in non-heat stabilized (Ultramid 8202C). Applications Ultramid 8202C HS BK102 is generally recommended for applications such as gears, valves, fittings, insulators, bushings, slides, window hardware, wiring devices, textile components and furniture casters.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Crystal,Heat Stabilized,Homopolymer,V-2 |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ASTM D792 |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.90 | % | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 9.3 | % | ISO 62 |
| saturated | 9.3 | % | ASTM D570 |
| Equilibrium, 23 ℃, 50% RH | 2.6 | % | ISO 62 |
| Balance, 50% RH | 2.6 | % | ASTM D570 |
| 24hr | 1.6 | % | ASTM D570 |
| 23℃，24hr | 1.6 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 3.0 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | No Break | ISO 179 | |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | 32 | J/m | ASTM D256 |
| 23℃ | 48 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 75.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 60.0 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 160 | ℃ | ISO 75-2/B |
| 0.45 MPa, unannealed | 190 | ℃ | ASTM D648 |
| Melting peak temperature | 220 | ℃ | ASTM D3418 |
| Melting temperature | |||
| DSC | 220 | ℃ | ISO 3146 |
| Linear coefficient of thermal expansion | |||
| MD | 8.1E-5 | 1/℃ | ASTM E831 |
| Relative temperature index | |||
| Electrical performance | UL 746 | ||
| 0.71 mm | 130 | ℃ | UL 746 |
| 1.5 mm | 130 | ℃ | UL 746 |
| 3.0 mm | 130 | ℃ | UL 746 |
| 6.0 mm | 130 | ℃ | UL 746 |
| Strength mechanical performance | UL 746 | ||
| 0.71 mm | 95.0 | ℃ | UL 746 |
| 3.0 mm | 105 | ℃ | UL 746 |
| Impact mechanical performance | UL 746 | ||
| 1.5 mm | 105 | ℃ | UL 746 |
| 6.0 mm | 105 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| 1.50 mm | > 1.0E+13 | ohms·cm | ASTM D257 |
| Compared to the leakage tracing index | 600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.71 mm | V-2 | UL 94 | |
| 1.50 mm | V-2 | UL 94 | |
| 3.00 mm | V-2 | UL 94 | |
| 6.00 mm | V-2 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | |||
| 23℃ | 122 | J | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 3500 | MPa | ISO 527-2 |
| tensile strength | ASTM D638 | ||
| Yield, 23 ℃ | 85.0 | MPa | ISO 527-2 |
| Fracture, -40 ℃ | 130 | MPa | ASTM D638 |
| Fracture, 23 ℃ | 90.0 | MPa | ASTM D638 |
| Fracture, 80 ℃ | 35.0 | MPa | ASTM D638 |
| Fracture, 121 ℃ | 25.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| Yield, 23 ℃ | 4.0 | % | ISO 527-2 |
| Yield, -40 ℃ | 3.0 | % | ASTM D638 |
| Yield, 23 ℃ | 4.0 | % | ASTM D638 |
| Yield, 80 ℃ | 25 | % | ASTM D638 |
| Yield, 121 ℃ | 27 | % | ASTM D638 |
| Nominal tensile fracture strain | |||
| 23℃ | 10 | % | ISO 527-2 |
| Bending modulus | ASTM D790 | ||
| 23℃ | 2800 | MPa | ISO 178 |
| -40℃ | 3370 | MPa | ASTM D790 |
| 23℃ | 3170 | MPa | ASTM D790 |
| 65℃ | 600 | MPa | ASTM D790 |
| 90℃ | 440 | MPa | ASTM D790 |
| 121℃ | 385 | MPa | ASTM D790 |
| bending strength | ASTM D790 | ||
| 23℃ | 95.0 | MPa | ISO 178 |
| -40℃ | 183 | MPa | ASTM D790 |
| 23℃ | 110 | MPa | ASTM D790 |
| 65℃ | 30.0 | MPa | ASTM D790 |
| 121℃ | 21.0 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 120 | ASTM D785 | |
| Ball hardness | 200 | MPa | ISO 2039-1 |
| Special value | Nominal value | Unit | Test method |
|---|---|---|---|
| Yield, -40 ℃ | 137 | MPa | ASTM D638 |
| Yield, 23 ℃ | 90.0 | MPa | ASTM D638 |
| Yield, 80 ℃ | 40.0 | MPa | ASTM D638 |
| Yield, 121 ℃ | 30.0 | MPa | ASTM D638 |
| Fracture, -40 ℃ | 5.0 | % | ASTM D638 |
| Fracture, 23 ℃ | 12 | % | ASTM D638 |
| Fracture, 80 ℃ | > 100 | % | ASTM D638 |
| Fracture, 121 ℃ | > 100 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.15 | % | |
| Processing (melt) temperature | 240 to 285 | °C | |
| Mold temperature | 65 to 80 | °C | |
| Injection pressure | 3.50 to 12.5 | MPa | |
| Injection speed | Fast | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |