| About |
|---|
| An easy flowing injection moulding grade for fast processing. Used for highly stressed technical parts, such as bearings, gear wheels and electrically insulating parts such as terminals and cable connectors.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Features | Good liquidity,Quick molding cycle,Grease resistance,Insulation |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ISO 1183 |
| viscosity number | |||
| At 0.5% 96% H2SO4 | 150 | cm³/g | ISO 307, 1157, 1628 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 8.0 to 9.0 | % | ISO 62 |
| Hygroscopicity | |||
| 23 ℃, equilibrium, 50% R H | 2.50 to 3.10 | % | ISO 62 |
| Melt Volume Rate | |||
| 275℃，5 kg | 120 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| parallel | 1.38 | % | ISO 2577, 294-4 |
| normal | 1.68 | % | ISO 2577, 294-4 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 | ℃ | ISO 11357-1/-3 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 280 to 300 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 5000 h |
| 3. 20000 h |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |