| About |
|---|
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA 9T |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1510 | kg/m³ | ISO 1183 |
| Viscosity number | |||
| 0.5 % in 96% H2SO4 | 78 | cm³/g | ISO 307, 1157, 1628 |
| Molding shrinkage | |||
| parallel | 0.2 | % | ISO 294-4 |
| vertical | 0.9 | % | ISO 294-4 |
| Melt Volume Rate | |||
| 325℃，2.16 kg | 25 | cm³/10min | ISO 1133 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.4 mm | V-0 | calss | UL 94，IEC 60695 |
| 0.8 mm | V-0 | calss | UL 94，IEC 60695 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 13100 | MPa | ISO 527 |
| Tensile Stress | |||
| Broken BRK | 165 | MPa | ISO 527 |
| Tensile Strain | |||
| Broken BRK | 2 | % | ISO 527 |
| Flexural Modulus | 12800 | MPa | ISO 178 |
| Flexural Strength | 253 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 63 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | 16 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa | 278 | ℃ | ISO 75-1/-2 |
| Coeff. of linear thermal expansion | |||
| parallel | 13-16 | ×10-6/K | ISO 11359-2 |
| vertical | 60-63 | ×10-6/K | ISO 11359-2 |
| Melting temperature | 305 | ℃ | ISO 11357-3 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Compared Tracking Index | 600 | IEC 60112 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Melt Temperature | 300-330 | ℃ | |
| Mold Temperature | 100-140 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |