Ultramid® B33 01

About
Ultramid B33 01 is an intermediate viscosity. PA6 grade. It conforms to FDA requirements including, 21 CFR 177.1500, EU Directive 2002/72/EC, the German BfR recommendation “X Polyamide”, 1.6.1998 or legislations for other countries will be provided on request. Applications Typical applications include production of biaxial oriented and cast film and monofilaments.&&

Product Description
SupplierBASF
GenericPA6
Material StatusCommercial: Active
FeaturesFood contact compliance,Grease resistance
AvailabilitysNorth America
Process MethodsFilm extrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density1.13g/cm³ISO 1183
Apparent density0.70g/cm³
Water absorption rate
Saturation, 23 ℃9.5%ISO 62
Equilibrium, 23 ℃, 50% RH2.6%ISO 62
Viscosity number
96% H2SO4195cm³/gISO 307
water content< 0.10%ISO 15512
Relative viscosity
1% in 96% Sulfuric Acid3.30 ISO 307

THERMALNominal valueUnitTest method
Melting temperature
DSC220ISO 3146

Supplementary informationNominal valueUnitTest method
Particle shapecylindrical 
Particle size2.00 to 2.50mm

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.