Ultramid® Endure D5G3 BM BK20560

About
Ultramid Endure D5G3 BM BK20560 is a glass fiber reinforced blow molding grade with good sagging behavior, ideal swelling and excellent heat aging resistance up to at least 220 degC (428 degF).&&

Product Description
Supplier	BASF
Generic	PA66
Material Status	Commercial: Active
Features	Good heat aging resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus			ISO 527-2
23℃	5500	MPa	ISO 527-2
150℃	1700	MPa	ISO 527-2
tensile strength			ISO 527-2
Fracture, 23 ℃	115	MPa	ISO 527-2
Fracture, 150 ℃	46.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
Fracture, 23 ℃	5.0	%	ISO 527-2
Fracture, 150 ℃	17	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
-30℃	4.4	kJ/m²	ISO 179
23℃	10	kJ/m²	ISO 179
Charpy Unnotch Impact strength			ISO 179
-30℃	48	kJ/m²	ISO 179
23℃	84	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	220	℃	ISO 75-2/A
0.45 MPa, unannealed	250	℃	ISO 75-2/B
Melting temperature
DSC	260	℃	ISO 3146
Linear coefficient of thermal expansion
TD	9.5E-5 to 1.3E-4	1/℃
MD	3.3E-5 to 3.4E-5	1/℃

Supplementary information	Nominal value	Unit
Blow Molding Drying Temperature	71	℃
Blow Molding drying time	2.0 to 4.0	hr
Blow Molding Melt Temperature	270 to 290	℃
Blow Molding Moisture Content	0.15	%
Blow Molding Mold Temperature	60 to 90	℃
Blow（up Ratio）	2.0:1.0

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.