| About |
|---|
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Grease resistance,HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.5 | g/cm³ | ISO 1183 |
| viscosity | 1.36 | g/cm³ | ISO 307, 1157, 1628 |
| Melt Volume Rate | |||
| 275℃，5 kg | 20.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.2 | % | ISO 294-4，ISO 2577 |
| TD | 0.8 | % | ISO 294-4，ISO 2577 |
| Melt Temperature | 250-275 | ℃ | |
| Mold temperature | 80-90 | ℃ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 12000 | MPa | ISO 527-2 |
| tensile strength | |||
| Fracture, 23 ℃ | 170 | MPa | ISO 527 |
| Tensile strain | |||
| Fracture, 23 ℃ | 2.5 | % | ISO 527 |
| Bending modulus | |||
| 23℃ | 11200 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength | ISO 179/1eU | ||
| 23℃ | 65 | kJ/m² | ISO 179/1eU |
| -30℃ | 45 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 23℃ | 95 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 210 | ℃ | ISO 75-1/2 |
| 0.45 MPa, unannealed | 220 | ℃ | ISO 75-1/2 |
| Solution temperature | |||
| DSC | 220 | ℃ | ISO 11357-1/-3 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 1.50 mm | >1.0E+13 | ohms·cm | IEC 63631-3-1 |
| Surface resistivity | 1.0E+10 | ohms | IEC 63631-3-1 |
| Compared to the leakage tracing index | 450 | – | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.80 mm | V-0 | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |