Ultrason® E 2020 P

About
Ultrason E 2020 P is polyethersulphone flakes for solvent based processes. The product is soluble in N-Methylpyrrolidone and N,N-Dimethylacetamide. Applications Typical applications include membrane applications and coatings.&&

Product Description
Supplier	BASF
Generic	PES
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Water absorption rate
Equilibrium, 23 ℃, 50% RH	1.0	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	2650	MPa	ISO 527-2
tensile strength
Yield, 23 ℃	85.0	MPa	ISO 527-2
Tensile strain
Yield, 23 ℃	6.9	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	205	℃	ISO 75-2/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.