ULTZEX™ 20100J

About
ULTZEX™ 20100J is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ULTZEX™ 20100J include caps/lids/closures and consumer goods. Primary characteristic: good escr (stress crack resistant).&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	High ESCR
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.916	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	8.5	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	300	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	95.0	℃	ISO 306
Melting temperature	120	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	54		ISO 868
tensile strength			ISO 527-2
yield	9.00	MPa	ISO 527-2
fracture	17.0	MPa	ISO 527-2
Tensile strain
fracture	> 500	%	ISO 527-2
Bending modulus	160	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.