UmaPET EMO/EMI

About
KEY FEATURES Uma PET EM is transparent film with one side Embossable properties. This film exhibits excellent processability and is suitable for high speed and high resolution soft embossing which widely used for hologram applications. The special Embossable surface eliminates the need for additional polymer coating over film. The film possesses low Haze, high clarity, high gloss along with good frictional, mechanical and thermal properties. APPLICATIONS Direct embossing film is used for making Holographic Film which is used in wide applications. Packaging for making pouches, paper lamination and other decorative use. Security stickers, stickers etc as deterrent for duplication and counterfeiting of products such as credit cards drivers licenses, pharmaceutical products, computer software etc.&&

About

KEY FEATURES Uma PET EM is transparent film with one side Embossable properties. This film exhibits excellent processability and is suitable for high speed and high resolution soft embossing which widely used for hologram applications. The special Embossable surface eliminates the need for additional polymer coating over film. The film possesses low Haze, high clarity, high gloss along with good frictional, mechanical and thermal properties. APPLICATIONS Direct embossing film is used for making Holographic Film which is used in wide applications. Packaging for making pouches, paper lamination and other decorative use. Security stickers, stickers etc as deterrent for duplication and counterfeiting of products such as credit cards drivers licenses, pharmaceutical products, computer software etc.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,Low coefficient of friction,Embossing
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate			ASTM D1204
MD：150℃，0.013 mm，3 min	2.8	%
TD：150℃，0.013 mm，30 min	0.50	%

MECHANICAL	Nominal value	Test method
friction coefficient		ASTM D1894
With oneself – dynamic	0.50
With oneself – static	0.55

film	Nominal value	Unit	Test method
film thickness
test	13	µm
film thickness	13 µm
tensile strength			ASTM D882
MD, fracture, 13 µ m	206	MPa
TD, fracture, 13 µ m	216	MPa
Tensile strain			ASTM D882
MD, fracture, 13 µ m	100	%
TD, fracture, 13 µ m	90	%
dosage
13.0 µm	55.0	m²/kg	Internal Method

optical performance	Nominal value	Unit	Test method
Haze
13 µm	1.8	%	ASTM D1003

Supplementary information	Nominal value	Unit	Test method
Wetting Tension			ASTM D2578
Functional side：13.0 µm	40	dyne/cm
Plain side：13.0 µm	44	dyne/cm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.