| About |
|---|
| KEY FEATURES Uma PET IT is transparent film with plain surfaces in both sides. One side chemically coated or corona treated is also available as option. This film shows excellent isotropic characteristics i.e. high and balanced mechanical properties alongwith good thermal, mechanical, optical and surface properties. APPLICATIONS The film is widely used for lidding, printing, coating applications as well as lamination with paper and thin foils, metallising applications.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Optical performance,Good Printability,Electroplating |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | ASTM D1204 | ||
| MD：150℃，0.012 mm，30 min | 2.2 | % | |
| MD：150℃，0.023 mm，30 min | 2.2 | % | |
| TD：150℃，0.012 mm，30 min | 0.0 | % | |
| TD：150℃，0.023 mm，30 min | 0.0 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.45 | ||
| With oneself – dynamic | 0.42 | ||
| With oneself – static | 0.50 | ||
| With oneself – static | 0.48 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 12 23 | µm | |
| film thickness | 12, 23 µm | ||
| tensile strength | ASTM D882 | ||
| MD, fracture, 12 µ m | 216 | MPa | |
| MD, fracture, 23 µ m | 196 | MPa | |
| TD, fracture, 12 µ m | 226 | MPa | |
| TD, fracture, 23 µ m | 206 | MPa | |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 12 µ m | 100 | % | |
| MD, fracture, 23 µ m | 100 | % | |
| TD, fracture, 12 µ m | 95 | % | |
| TD, fracture, 23 µ m | 95 | % | |
| dosage | Internal Method | ||
| 12.0 µm | 59.5 | m²/kg | |
| 23.0 µm | 31.0 | m²/kg |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | ASTM D1003 | ||
| 12 µm | 3.5 | % | |
| 23 µm | 4.5 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Wetting Tension – Plain side | ASTM D2578 | ||
| 12.0 µm | 44 | dyne/cm | |
| 23.0 µm | 44 | dyne/cm |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |