UmaPET MO - SOLIAO

About
KEY FEATURES Uma PET MO is one side matte film with other side plain surface for excellent print quality. Other side corona or chemical coating as optional for improved adhesion performance. It has medium Haze, Medium gloss gloss film with excellent muted and grainy surface on matte side. The film exhibits excellent thermal, mechanical and medium matte surface properties one side with normal surface on the other side. It has excellent dimensional stability and excellent process ability. After metallization, shows silver finish as aesthetic. APPLICATIONS Excellent for packaging applications where plain side gives excellent print quality and other side matte finish to the print image. While pouching or packing shows excellent thermal stability. Typical end uses like soap wraps, baby wipes, moist tissues, dry fruits and other high endpackaging for different food / non – food products etc.&&

About

KEY FEATURES Uma PET MO is one side matte film with other side plain surface for excellent print quality. Other side corona or chemical coating as optional for improved adhesion performance. It has medium Haze, Medium gloss gloss film with excellent muted and grainy surface on matte side. The film exhibits excellent thermal, mechanical and medium matte surface properties one side with normal surface on the other side. It has excellent dimensional stability and excellent process ability. After metallization, shows silver finish as aesthetic. APPLICATIONS Excellent for packaging applications where plain side gives excellent print quality and other side matte finish to the print image. While pouching or packing shows excellent thermal stability. Typical end uses like soap wraps, baby wipes, moist tissues, dry fruits and other high endpackaging for different food / non – food products etc.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Dimensional Stability,Good Printability,Good bond,Electroplating,Heat Stabilized
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate			ASTM D1204
MD：150℃，0.012 mm，30 min	2.0	%
TD：150℃，0.012 mm，30 min	0.40	%

MECHANICAL	Nominal value	Test method
friction coefficient		ASTM D1894
With oneself – dynamic	0.38
With oneself – static	0.42

film	Nominal value	Unit	Test method
film thickness
test	12	µm
film thickness	12 µm
tensile strength			ASTM D882
MD, fracture, 12 µ m	196	MPa
TD, fracture, 12 µ m	206	MPa
Tensile strain			ASTM D882
MD, fracture, 12 µ m	90	%
TD, fracture, 12 µ m	90	%
dosage
12.0 µm	59.5	m²/kg	Internal Method

optical performance	Nominal value	Unit	Test method
gloss			ASTM D2457
60 °, 12.0 µ m, high gloss surface	110
60 °, 12.0 µ m, matte surface	45
Haze
12 µm	35	%	ASTM D1003

Supplementary information	Nominal value	Unit	Test method
Wetting Tension（Plain side，12.0 µm）	44	dyne/cm	ASTM D2578

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.