UMERIT® 500F - SOLIAO

About
UBE super polyethylene UMERIT® are ethylene alpha-olefin copolymers produced using metallocene catalyst by gas phase process. The metallocene catalytic method results in superior physical properties by being able to acquire any targeted molecular structures. Therefore UMERIT®500F offer various excellent properties: -Superior low temperature seal property, advantageous compared to 1500F -Reduced motor load at processing -Draw resonance at high-speed drawing hardly occurs&&

About

UBE super polyethylene UMERIT® are ethylene alpha-olefin copolymers produced using metallocene catalyst by gas phase process. The metallocene catalytic method results in superior physical properties by being able to acquire any targeted molecular structures. Therefore UMERIT®500F offer various excellent properties: -Superior low temperature seal property, advantageous compared to 1500F -Reduced motor load at processing -Draw resonance at high-speed drawing hardly occurs&&

Product Description
Supplier	UBE
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Copolymer,Low temperature heat sealing
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.904	g/cm³	ASTM D1505
Melt Flow Rate	4.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	1000	hr	ASTM D1693

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	81.0	℃	ASTM D1525
Melting temperature	87.0	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	44		ASTM D2240
tensile strength	42.0	MPa	ASTM D638
Tensile strain
fracture	720	%	ASTM D638
Bending modulus	140	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.