UNINAR® 740 - SOLIAO

About
UNINAR PVDF (POLYVINYLIDENE FLUORIDE) is a non-reinforced highly crystalline fluoropolymer that combines exceptional chemical resistance with superior strength and stability. When compared with traditional fluoropolymers like PTFE, UNINAR PVDF offers up to three times the typical strength and stiffness while maintaining unparalleled resistance to even the harshest chemicals—even at temperatures up to 300°F. These properties, along with its natural flame retardency (UL94, V-0) and ultrahigh purity have made it the material of choice for processing equipment components used in semiconductor manufacturing clean room environments. Because it also offers excellent toughness and electrical properties that remain stable over a wide range of both frequencies and temperatures, UNINAR PVDF is also often used in components used for power transmission. UNINAR PVDF is offered in two grades; UNINAR 740 (beige) and UNINAR 1010 (white). Both grades machine easily and are available from Nytef Plastics in a full range of heavy gauge rod, plate, and tubular bar sizes. UNINAR PVDF ATTRIBUTES 300°F continuous use temperature Excellent balance of strength, toughness and abrasion resistance Resistant to virtually all chemicals and solvents Extremely low moisture absorption Low permeability to gases & liquids Excellent UV & nuclear radiation resistance Flame resistant -UL 94 V-0 rated Easily machined and fabricated TYPICAL INDUSTRIES Chemical Pulp and paper processing Food processing equipment Electrical and electronics products Semiconductor manufacturing Petroleum processing APPLICATIONS Pump components Manifolds and valves Fluid sensors Liquid chromatography components Analytical instruments Bearings and bushings&&

About

UNINAR PVDF (POLYVINYLIDENE FLUORIDE) is a non-reinforced highly crystalline fluoropolymer that combines exceptional chemical resistance with superior strength and stability. When compared with traditional fluoropolymers like PTFE, UNINAR PVDF offers up to three times the typical strength and stiffness while maintaining unparalleled resistance to even the harshest chemicals—even at temperatures up to 300°F. These properties, along with its natural flame retardency (UL94, V-0) and ultrahigh purity have made it the material of choice for processing equipment components used in semiconductor manufacturing clean room environments. Because it also offers excellent toughness and electrical properties that remain stable over a wide range of both frequencies and temperatures, UNINAR PVDF is also often used in components used for power transmission. UNINAR PVDF is offered in two grades; UNINAR 740 (beige) and UNINAR 1010 (white). Both grades machine easily and are available from Nytef Plastics in a full range of heavy gauge rod, plate, and tubular bar sizes. UNINAR PVDF ATTRIBUTES 300°F continuous use temperature Excellent balance of strength, toughness and abrasion resistance Resistant to virtually all chemicals and solvents Extremely low moisture absorption Low permeability to gases & liquids Excellent UV & nuclear radiation resistance Flame resistant -UL 94 V-0 rated Easily machined and fabricated TYPICAL INDUSTRIES Chemical Pulp and paper processing Food processing equipment Electrical and electronics products Semiconductor manufacturing Petroleum processing APPLICATIONS Pump components Manifolds and valves Fluid sensors Liquid chromatography components Analytical instruments Bearings and bushings&&

Product Description
Generic	PVDF
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,High purity,Good Electrical Properties,Gamma radiation,Machinable,Low odor,Flame Characteristics,Good stability,Good wear resistance,Solvent resistance,High crystallization,Low moisture absorption,V-0
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.78	g/cm³	ASTM D792
Water absorption rate			ASTM D570
24hr	0.010 to 0.030	%	ASTM D570
saturated	0.030	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	290	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	116	℃	ASTM D648
Continuous use temperature	149	℃	UL 746
Melting peak temperature	171	℃	ASTM D3418
Linear coefficient of thermal expansion
MD	1.2E-4	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+16	ohms·cm	ASTM D257
Dielectric strength	10 to 11	kV/mm	ASTM D149
Dielectric constant
1 MHz	8.20		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
6.10 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	84		ASTM D785
Tensile modulus	1570	MPa	ASTM D638
tensile strength
yield	41.4	MPa	ASTM D638
Tensile strain
fracture	150	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790
bending strength	50.0	MPa	ASTM D790
friction coefficient	0.58		ASTM D1894

Notes
1. Typical properties: these are not to be construed as specifications.
2. Method A (Short-Time)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.