UNITREX® CM3801

About
UNITREX CM3801 extruded thermoplastic shapes provide users with improved physical properties compared to standard, unfilled PEEK grades through the addition of a proprietary ceramic filler. Additionally, this material offers Continuous Use Temperature of up to 480 ° F (249 ° C). UNITREX CM3801 offers excellent dimensional stability and machinability for tight pitch/small diameter drilling operations and is especially well suited for IC test socket applications. Available in multiple rod and plate configurations by special order in natural white color.&&

About

UNITREX CM3801 extruded thermoplastic shapes provide users with improved physical properties compared to standard, unfilled PEEK grades through the addition of a proprietary ceramic filler. Additionally, this material offers Continuous Use Temperature of up to 480 ° F (249 ° C). UNITREX CM3801 offers excellent dimensional stability and machinability for tight pitch/small diameter drilling operations and is especially well suited for IC test socket applications. Available in multiple rod and plate configurations by special order in natural white color.&&

Product Description
Generic	PEEK
Material Status	Commercial: Active
Features	Good Dimensional Stability,Machinable,V-0
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	260	℃	ASTM D648
Glass transition temperature	143	℃	ASTM D3418
Melting temperature	341	℃	DSC
Relative temperature index	249	℃	UL 746

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+13	ohms	ASTM D257
Volume resistivity	> 1.0E+15	ohms·cm	ASTM D257
Dielectric strength	16	kV/mm	ASTM D149
Dissipation factor
1 MHz	5.0E-4		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
3.00 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	102		ASTM D785
Tensile modulus	4400	MPa	ASTM D638
tensile strength
yield	84.1	MPa	ASTM D638
Tensile strain
fracture	10	%	ASTM D638
Bending modulus	4400	MPa	ASTM D790
bending strength	160	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.