| About |
|---|
| Excellent stress crack resistance and rigidity High impact strength Moderate swell High melt strength Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a U.S. FDA-DMF Canadian HPFB No Objection (with Limitations) EU, No 10/2011 Underwriters Laboratories Inc. (ULI) Consult the regulations for complete details. UNIVAL™ DMDA-6200 NT 7 High Density Polyethylene (HDPE) Resin is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals (e.g., detergents, bleach, fabric softeners), toiletries and cosmetics (e.g., shampoos, creams, lotions, etc.), health and medicinal aids, and food products. In addition, it can be blow molded into other thin walled parts and houseware items, and also can be extruded into profiles.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 0.38 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 33 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 100% non-ionic surfactant, F50 | 80.0 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | 168 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 73.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -76.1 | ℃ | ASTM D746 |
| Vicat Softening Temp | 129 | ℃ | ASTM D1525 |
| Melting temperature | |||
| DSC | 131 | ℃ | Internal Method |
| Crystallization peak temperature | |||
| DSC | 118 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 61 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 26.9 | MPa | ASTM D638 |
| fracture | 31.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 7.0 | % | ASTM D638 |
| fracture | 1000 | % | ASTM D638 |
| Bending modulus | |||
| 2% secant | 1000 | MPa | ASTM D790-B |
| Notes |
|---|
| 1. With limitations |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Type S |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |