UNIVAL™ DMDG-6240 NT 7

About
UNIVAL™ DMDG-6240 NT 7 is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals, such as laundry detergent, health and medicinal aids as well as agricultural and food products. The product is specifically designed to provide excellent processing in all extrusion blow molding equipment. Main Characteristics: Excellent processability High melt strength Excellent ESCR Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a. Canadian HPFB No Objection Consult the regulations for complete details.&&

About

UNIVAL™ DMDG-6240 NT 7 is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals, such as laundry detergent, health and medicinal aids as well as agricultural and food products. The product is specifically designed to provide excellent processing in all extrusion blow molding equipment. Main Characteristics: Excellent processability High melt strength Excellent ESCR Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a. Canadian HPFB No Objection Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.946	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.40	g/10min	ASTM D1238
190℃，21.6kg	43	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 100% non-ionic surfactant, F50	400	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Tensile impact strength	151	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	62.8	℃	ASTM D648
Embrittlement temperature	< -76.1	℃	ASTM D746
Vicat Softening Temp	121	℃	ASTM D1525
Melting temperature
DSC	126	℃	Internal Method
Crystallization peak temperature
DSC	108	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	62		ASTM D2240
tensile strength			ASTM D638
yield	23.8	MPa	ASTM D638
fracture	16.5	MPa	ASTM D638
Tensile strain			ASTM D638
yield	11	%	ASTM D638
fracture	770	%	ASTM D638
Bending modulus			ASTM D790B
1% secant	1020	MPa	ASTM D790-B
2% secant	814	MPa	ASTM D790-B
tangent	1150	MPa	ASTM D790-B

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.